62-0504-001437-00101111-071595-440BXSMC can't ID

How-to identify your motherboard ?
Post Reply
pariss125
New visitors - please read the rules.
Posts: 3
Joined: Wed Apr 23, 2003 1:23 am

62-0504-001437-00101111-071595-440BXSMC
First time poster. I need a manual for this PcChips board. I have been through all the sites, utilities, posts, and I can't seem to fully identify this board or get any info on it. I also can't cross over any numbers that seem to make sense. Help would be appreciated.
ajzchips
El cheapo dude
Posts: 3048
Joined: Sat Mar 23, 2002 12:41 pm
Location: Madrid, Spain

I've never seen the 440BXSMC part before...
pariss125
New visitors - please read the rules.
Posts: 3
Joined: Wed Apr 23, 2003 1:23 am

I had tried the PcChips Lottery before but since DENNISS put it up again I decided to try again. I was able to identify my board by filling in the field just for the socket type. I am very pleased that I found the board and that there was help available to me. Thanks for that. I still cannot get through to PcChips to download the manual. Either the board number is not offered as a selection or the site hangs. I have tried to call them and e-mail PCcHIPS but still can't get through. I will keep trying. I can't believe this is so difficult. I have spent about a year on and off researching for information on this motherboard. I am discouraged but still fighting and I am glad I have made this major find of what board I have. To make a long story long thanks for those who support and I am still trying to get the manual, I need the jumper settings. I am not sure what the SMC is, ajzchips, in the 440BXSMC but FYI the set is i440BX/ZX.
pariss125
New visitors - please read the rules.
Posts: 3
Joined: Wed Apr 23, 2003 1:23 am

ajzchips!! You did it. As you see I am a new poster so I didn't realize you had a web site until I lazily looked. There you have the manual! I am in heaven. Though I could not have done it without DENNISS either in finding my board number and I have to give credit to WIMSBIOS page. Fantastic, now that I have support and know the processess I am going to do a lot of upgrading. Thanks again!
Denniss
BIOS Guru
Posts: 3153
Joined: Thu Mar 21, 2002 8:16 pm
Location: Near Hannover (CEBIT) Germany
Contact:

Please give use some Infos about the model numer you found out !!
ajzchips
El cheapo dude
Posts: 3048
Joined: Sat Mar 23, 2002 12:41 pm
Location: Madrid, Spain

...I'm quite interested, too...
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

M773/M773MR
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Post Reply