Motherboard is NOT dead.
Computer is a company computer for accounting - and has NOT had anything added or changed.
When started cold...get checksum error block v1.0
with "detecting floppy drive A media" and "Insert sys disk".
At this point - I turn off (shutdown by power button) and restart by power button and will restart fine. (Some times I have to do this 2 or 3 times). Most of the time - after its been running awhile it will warm boots without a problem.
Replaced the ram module - no change in behavior.
What should I suspect (replace) next, the power supply?
Thank you.
Sam
Checksum error
What board and CPU is that?
I'd test it with another power supply. Also check capacitors on the board, it they're not going to explode.
I'd test it with another power supply. Also check capacitors on the board, it they're not going to explode.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
UniFlash - Flash anything anywhere