40GB: 62-0406-001437-00101111-071595-440bx-M761_3.0-8671-H

BIOS update, EIDE card, or overlay software? (FAQ Hard disk recognition)
Post Reply
NeoDd
New visitors - please read the rules.
Posts: 12
Joined: Thu Sep 25, 2003 7:43 am
Location: Mongolia
Contact:

My quantum 40GB hard drive isn't recognized.
Please help me!
How could I fix my bios or where I could find updated for this setting bios.
Please help me! :roll:
I'm Mongolian :-)
NeoDd
New visitors - please read the rules.
Posts: 12
Joined: Thu Sep 25, 2003 7:43 am
Location: Mongolia
Contact:

There aren't any EPROM support 40Gb hard disk. I can't found.
Please help!
How could I fix my EPROM hard disk table? Could I?
I'm Mongolian :-)
NickS
BIOS Bodhisattva
Posts: 3145
Joined: Fri May 03, 2002 10:34 am
Location: Thames Valley, UK

Are you sure that the 32GB limit jumper has been removed from the drive ?
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

If the jumpers are set correctly, and it still does not work properly, enter HDD parameters manually in SETUP.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
NeoDd
New visitors - please read the rules.
Posts: 12
Joined: Thu Sep 25, 2003 7:43 am
Location: Mongolia
Contact:

Where could I find that jumper?
I couldn't find. There are only 3 jumper settings that master, slave and cs.
Now I set manually. :? :(
I'm Mongolian :-)
Denniss
BIOS Guru
Posts: 3153
Joined: Thu Mar 21, 2002 8:16 pm
Location: Near Hannover (CEBIT) Germany
Contact:

It seems you already have the latest 19990406 Bios installed

Look at your HDD - the parameters for Cylinder Head and Sector should be written onto it .
Enter Bios setup and enter these values manually at the port your HDD is connected to and enable LBA for this port

Usually your HDD should work with full capacity then

Tested with M571 M560TG M715
Post Reply