Hi,
Info I have as PC needs not working
Motherboard ID: 08/06/98-i440LX-<P2L97>-00
MBoard has P2L97 Rev 2.05 printed on it
Info from another program before it stopped powering up is:-
Motherboard Chipset Intel Natoma 82440LX/EX
MB Serial Number: MB-1234567890
Manufacturer: ASUSTeK Computer INC.
Version:REV 1.xx
Motherboard Size: 210 mm x 300 mm
Expansion Slots: 2 ISA, 5 PCI, 1 AGP
RAM Slots: 3 DIMM
Form Factor: ATX
Award BIOS Type: Award Modular BIOS v4.51PG
Award BIOS Message: ASUS P2L97 ACPI BIOS Revision 1005 \/
CPU Type: Intel Pentium II, 375 MHz08/06/98
I need correcct information as I need to get a tower to install it into as the desktop is 'damaged'.
Regards
Jeana
Need to check MBoard is ASUS and find manual
Sorry for the confustion.
I would like the correct manual, I can only find v1 not v5 and don't know if this manual is for all versions.
Also will the manual tell me if I can upgrade any components on motherboard etc.
I also need to know what kind of tower this board will fit in, can I ask this question here or is there another forum in which I can post the details of my components and get an answer.
I live in Australia, and am new to this
Regards
Jeana
I would like the correct manual, I can only find v1 not v5 and don't know if this manual is for all versions.
Also will the manual tell me if I can upgrade any components on motherboard etc.
I also need to know what kind of tower this board will fit in, can I ask this question here or is there another forum in which I can post the details of my components and get an answer.
I live in Australia, and am new to this
Regards
Jeana
-
- BIOS Guru
- Posts: 3153
- Joined: Thu Mar 21, 2002 8:16 pm
- Location: Near Hannover (CEBIT) Germany
- Contact:
www.asus.com should have all manuals you need even if it's only one
Upgrades : Max Celeron533 PPGA , 256MB SDRAM per stick (only the older ones with 16-chips/doublesided/16x8) .
This board should have no problem with any AGP graphics card that's backwards compatible to AGP rev1.x specification AKA AGP1x/2x
Upgrades : Max Celeron533 PPGA , 256MB SDRAM per stick (only the older ones with 16-chips/doublesided/16x8) .
This board should have no problem with any AGP graphics card that's backwards compatible to AGP rev1.x specification AKA AGP1x/2x