MY BIOS IS AMI BIOS
RELEASED ON 09/07/99
T810B-S VER. 1.01 (990907)
AND THE ID. NO. IS
63-0122-008031-00101111-071595-i810-T8100122-H
PLEASE HELP TO UPGRADE THE BIOS, SO THAT I WILL BE ABLE TO USE A LARGE HARD DISK, LIKE 40GB OR ABOVE.
THANKS
40GB: 63-0122-008031-00101111-071595-i810-T8100122-H
Zida Tomato T810B-S, see
http://www.zida.com/eng/support/bios.htm
An AMI BIOS of that date should support HDD to 128GB. Have you checked that the 32GB limit jumper is removed from the HDD ?
http://www.zida.com/eng/support/bios.htm
An AMI BIOS of that date should support HDD to 128GB. Have you checked that the 32GB limit jumper is removed from the HDD ?
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
If it hangs during POST, enter HDD parameters manually.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
UniFlash - Flash anything anywhere
THANK YOU FOR YOUR ADVICE IN REPLY OF MY MASSAGE. I HAVE CONNECTED A 40GB HDD BUT MY BIOS CAN NOT AUTO DETECT THE HDD AND IT IS HANGED. KINDLY ADVICE ME TO UPGRADE MY BIOS.
MY BIOS CAN NOT SUPPORT BEYOND 20GB HDD. PLEASE ALSO HELP ME TO FIND OUT THE 32GB LIMIT JUMPER.
THANKS
MY BIOS CAN NOT SUPPORT BEYOND 20GB HDD. PLEASE ALSO HELP ME TO FIND OUT THE 32GB LIMIT JUMPER.
THANKS
If it is hanging, it probably does not have the 32GB limit jumper installed. Information about jumpers should be available from the HDD manufacturer's website.
Have you tried:
1. setting HDD type and translation mode to AUTO/AUTO, or AUTO/LBA
2. entering Cylinders/heads/sectors manually ?
before attaching the drive ?
Have you tried:
1. setting HDD type and translation mode to AUTO/AUTO, or AUTO/LBA
2. entering Cylinders/heads/sectors manually ?
before attaching the drive ?
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
1. Have you tried AUTO/LBA ?
2. Have you tried Rainbow's advice and entered User parameters with translation type LBA ?
3. Have you checked the manufacturer's information for placing a 32GiB limit jumper and tried that ?
2. Have you tried Rainbow's advice and entered User parameters with translation type LBA ?
3. Have you checked the manufacturer's information for placing a 32GiB limit jumper and tried that ?
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"