USB device problem

BIOS Questions that don't belong in the other forums. Read them!
Post Reply
crock
New visitors - please read the rules.
Posts: 1
Joined: Mon Mar 01, 2004 12:48 am

I hope someone can help. I had installed a new hard drive and had to have the computer shop flash the bios. Now I'm trying to install a printer and it says it's not communicating with the computer. The reason they state is that the usb needs to be enabled. My question is if I go into bios before win starts, to enable the usb, will I be messing up the bios that were flashed? I don't want to have to take it back in the shop. Also the printer has only a usb connection. Any help would be appreciated. Thanks!
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

Call the shop and ask why they did disable the USB in the bios in the first place.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Post Reply