40GB: ATREND ATC-6130 440LX AGP

BIOS update, EIDE card, or overlay software? (FAQ Hard disk recognition)
NickS
BIOS Bodhisattva
Posts: 3145
Joined: Fri May 03, 2002 10:34 am
Location: Thames Valley, UK

Ederqui: what are you trying to say ?
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
bios-atc
New visitors - please read the rules.
Posts: 2
Joined: Mon Mar 22, 2004 11:28 pm

She have an comparative problem like klaufi.

She have an Samsumg HD with 80 GB (SV0802N) and the following PC Data:

BIOS Date: 01/08/98
BIOS Type: Award Modular BIOS v4.51PG
BIOS ID: 01/08/98-i440LX-W977-ATC-6130C-00
OEM Sign-On: ATC-6130 BIOS VER:1.0 03
Chipset: Intel 440EX/LX rev 3
Superio: Winbond 977TF rev 0 found at port 3F0h
OS: Microsoft Windows 98 SE Version: 4.10.2222 A

she ask for the same file like klaufi (or newer)
ederqui
New visitors - please read the rules.
Posts: 3
Joined: Mon Mar 22, 2004 11:22 pm

As I had said I have a new HD 80GB but my bios does not like it somehow.
Here details about my bios and motherboard
Program: Unicore BIOS Wizard Version 3.23
Program: eSupport.com BIOS Detect v1.2 July 21, 2003
BIOS Date: 01/08/98
BIOS Type: Award Modular BIOS v4.51PG
BIOS ID: 01/08/98-i440LX-W977-ATC-6130C-00
OEM Sign-On: ATC-6130 BIOS VER:1.0 03
Chipset: Intel 440EX/LX rev 3
Superio: Winbond 977TF rev 0 found at port 3F0h
OS: Microsoft Windows 98 SE Version: 4.10.2222 A
Could please somebody help me?
I guess a need and update for my bios.

Thank you very much for your help in advance
BRGS
Eva
Denniss
BIOS Guru
Posts: 3153
Joined: Thu Mar 21, 2002 8:16 pm
Location: Near Hannover (CEBIT) Germany
Contact:

http://wims.rainbow-software.org/index.php

ATC6130 v 1.0 Bios

Award flashprog might complain due to a sligthly changed Bios-ID - Ignore this or use Uniflash
bios-atc
New visitors - please read the rules.
Posts: 2
Joined: Mon Mar 22, 2004 11:28 pm

thx

works fine!
ederqui
New visitors - please read the rules.
Posts: 3
Joined: Mon Mar 22, 2004 11:22 pm

Thank you very much.
It is just working perfect.
There is only one more thing and it is that eventhough my HD is 80GB windows 98Se only shows 74,5 GB
Could somebody give any tip ?
BRGDS,
eva
Denniss
BIOS Guru
Posts: 3153
Joined: Thu Mar 21, 2002 8:16 pm
Location: Near Hannover (CEBIT) Germany
Contact:

1MegaByte = 1024KiloByte

HDD manufacturer count this way :
1MB = 1000KB

So a HDD manufacturer reached 80GB and in the real computer world it's about 3-5GB less than 80GB

Then comes the OS and needs some MB/GB,too
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

To give you an idea:

my 80GB western digital shows up as 74.53GB in windows
my 80GB Maxtor shows up as 76.33GB in windows

this is with XP. Usually you'll loose some 5 to 7% compared to the manufacturer rated size...
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Ritchie
BIOS Guru
Posts: 761
Joined: Wed Oct 30, 2002 5:17 am

And I think a small percentage of additional space is also lost by the O/S in the creation of partitions, etc.

For example, I think it was with our old system that when I installed Windows 2000, 8MB of the disk space it reported was unavailable, even with a single partition. When I tried to manually create partitions, the maximum allowed partition size reported was that much less than the disk size reported, and it would not allow me to enter through a disk size equal to the reported disk size or between the disk size reported and maximum allowed partitin size reported. Even with Windows 2000 installed on this 6GB disk, 8MB would show up as unpartitioned space. And this is even with how I usually let Windows 2000/XP Setup create partitions itself after telling it to install on an unpartitioned, unformatted drive (Setup handles it all).

I think the most probable uses of this disk space is in the information used to store the partitions and File Allocation Tables, so that by the time you look at the number of MB available for actual files and folders, a bit of the space, reported by say, the BIOS, has already been used.
ericdew
New visitors - please read the rules.
Posts: 1
Joined: Thu Sep 04, 2008 2:50 am

This site is fantasmogorgeous!
Thanks to the BIOS update for my Atrend 6130 motherboard I am able to use Hard Disc recognition up to 135 GB! And it WORKS! Just a few hours ago I reinstalled on a 80 GB seagate drive Windows 98 SE and this on a 233 Mhz Pentium II PC! I still use this 'Old Bastard' for text related purpuses. My original 4 GB Primary Hard Disc crashed a week ago and now I can connect it as a slave drive to see if I can recuperate some lost files. I backed up most of it but I'm still missing a few things.
Many thanks to the Godfather of this site, I suppose it's Wim.
Thank you man.
Eric.
Post Reply