the Bios information on this board in the Bios is :
Award Modular Bios v4.50PG , An Energy Star Ally
Copyright(C) 1984-95 , Award Software , INC .
GREEN PENTIUM PCI SYSTEM BIOS
PENTIUM_S CPU at 100MHz
Memory Test 16384K OK
Award Plug and Play Bios Extension v1.0A
Copyright(C) 1995 , Award Software , INC .
Press DEL to enter SETUP
12/27/95-SIS-5511B-5512-5513-2A51DA1EC-9B
....this Bios is not named in any of the Bios sites I have been to and there is a link to tell someone on one of the sites of Bios not listed there but the link does not work .
edited: contact made with Bios Man
the Bios loaded only lets me use a 4224GB harddrive , the largest partition available to me though LBA 8448GB is available in the Bios . There are 3 options available to choose for a type of harddrive in the Bios . 2(Y) , 1 , 3 .
I put a Maxtor 91021U2 HD in , jumpered and cabled ok .
old looking Bios
I'm hoping I can use a 10gig hd at 7560mb's .
I've read up and set the hd in the Bios to 7560MB's .
I installed NT on a partion 4000MB's but I've been trying to reinstall because of the error message .
Model Number is PH5 v1.4 and I haven't seen a version 1.4 just a version 1.3 . I'm now looking at updating the Award Bios above 4.50 PG .
I still don't know what I will use this computer for but I'm having a lot of fun trying to use it .
I got to load Windows NT and used it for a while but now I can't boot passed Error Loading OS error message . The HDD Led is red all the time from boot up .
Maybe I just have to wait for the 64mb's of memory that's on it's way .
What about the power led staying red .
I think the hardware is ok .
I think I can put a Gigabyte 4MB graphics card in it , maybe .
I've read up and set the hd in the Bios to 7560MB's .
I installed NT on a partion 4000MB's but I've been trying to reinstall because of the error message .
Model Number is PH5 v1.4 and I haven't seen a version 1.4 just a version 1.3 . I'm now looking at updating the Award Bios above 4.50 PG .
I still don't know what I will use this computer for but I'm having a lot of fun trying to use it .
I got to load Windows NT and used it for a while but now I can't boot passed Error Loading OS error message . The HDD Led is red all the time from boot up .
Maybe I just have to wait for the 64mb's of memory that's on it's way .
What about the power led staying red .
I think the hardware is ok .
I think I can put a Gigabyte 4MB graphics card in it , maybe .
Last edited by lonktwond on Sun Jun 19, 2005 3:04 pm, edited 1 time in total.
MEC Abit PH50705C v1.4
Bios 12/27/95 2A51DA1EC-9B
SiS-5511B/5512/5513
Intel BP8050200 CPU
Bios 12/27/95 2A51DA1EC-9B
SiS-5511B/5512/5513
Intel BP8050200 CPU
OEM Abit PH5 for Micro Equipment Corporation (MEC)lonktwond wrote:12/27/95-SIS-5511B-55112-55113-2A51DA1EC-9B
....this Bios is not named in any of the Bios sites
MEC Abit PH50705C v1.4
More than 100,000 BIOS strings in my database just now!
http:/ /www.kuriaki.has.it/
http:/ /www.supportbios.info
------------------------------------------
Saludos desde Cancun, Mexico
KURIAKI
http:/ /www.kuriaki.has.it/
http:/ /www.supportbios.info
------------------------------------------
Saludos desde Cancun, Mexico
KURIAKI
whichever bios is in the system did not let me much over 4gig . I've tried flashing with the Bios but I'm not sure what to name the files at the flash prompts . I think I should be trying awdflashph5e0 at the prompt but the power led is red all the time and I do not know why yet .
no worries now , I will leave the original bios , maybe later I will try an Abit Bios Flash for the Abit PH v1.3 motherboard .
no worries now , I will leave the original bios , maybe later I will try an Abit Bios Flash for the Abit PH v1.3 motherboard .
MEC Abit PH50705C v1.4
Bios 12/27/95 2A51DA1EC-9B
SiS-5511B/5512/5513
Intel BP8050200 CPU
Bios 12/27/95 2A51DA1EC-9B
SiS-5511B/5512/5513
Intel BP8050200 CPU