I have an ECS P6BX-A+ (Rev1.1a) m/board. I'm trying to get it to run a Western Didital 80gb HDD with 8meg of buffer, but unfortunately I'm not suceeding - BIOS update required.
I have searched for an update, and thought I had found what I wanted on ECS's US site. I downloaded version 5.6 and flashed with Awd66. Basically it won't flash, I get an error:
Quote:
Program file part number does not match with your system
The Full BIOS string reads:
05/07/1998-i440BX-W83977-P6BX-A+
Not sure whether it helps, but directly under the Award logo the screen reads:
P6BX-A+ Ver2.4 05/07/1998
i would really appreciate if someone would be able to help
me on this.
thanks for your time.
Migel
80 GB: 05/07/1998-I440BX-W83977-P6BX-A+
Hey ajzchips,
I have the same issue/problem.
I tried the /py switch, as you suggested, but it didn't help.
The only additional information I can provide is:
"Flash Type - WINBOND 29EE011 /5V"
Checksum on the BIOS file bxap56.bin is 4CCCH
Have also tried the awd822a version of the flash utility
Both return with the error:
"The file size does not match!"
Suggestions?
Thanks.
I have the same issue/problem.
I tried the /py switch, as you suggested, but it didn't help.
The only additional information I can provide is:
"Flash Type - WINBOND 29EE011 /5V"
Checksum on the BIOS file bxap56.bin is 4CCCH
Have also tried the awd822a version of the flash utility
Both return with the error:
"The file size does not match!"
Suggestions?
Thanks.