Via C3 900mHz with Award Modular BIOS v4.51PG

Don't ask how to over-clock.
Post Reply
New visitors - please read the rules.
Posts: 4
Joined: Mon Jun 03, 2002 7:29 pm

I normally use a Celeron 466mHz but I decided I wanted an upgrade.
My ECS EliteGroup P6SET-ML board is socket 370 so I got a Via.
My motherboard supplier's webpage had a chart of CPU compatibility.
Listed under Via C3 was 100mHz. (Probably meaning Front side Bus top amount)
I checked my BIOS and it can only handle FSB of up to 100mHz and Multipliers up to 7x. Anyone with basic math knows that's only 700mHz.
Is there any way to get past this? Or should I go back to the store and exchange it for a 700mHz and save some cash?
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia

Flash the latest if you don't already have it and put the CPU there. The multiplier is locked on most new CPUs - so for example I run Celeron 600 (multiplier 9x) on Asus P2B board from year 1999 (manual shows that multiplier is upto 8x).
Patched and tested BIOSes are at
UniFlash - Flash anything anywhere
Post Reply