Hi
I am new on this forum. I need some help making work a 40gb western digital IDE hard drive on my old socket 7 mobo (Chaintech agm2, award bios 4.51, VIA chipset amd k6-3). The problem is the following: the hard drive is only recognized as a 10 gb in BIOS. As far as I know, 10 gb is not a BIOS limit. Actually, my patched BIOS is supposed to support up to 128gb hdds. Note that my previous hdd was a 10gb and that the 40gb is second hand and was partionned in another computer. I have tried many solutions but none of them have worked. I have cleared CMOS, written zeros to drive, tried setting hard drive size using wd's data lifguard tools (it actually says my 40gb does not support this feature). I have also tried many jumper and cabling configurations. I do not know if I should bring back the hdd to the store. Mabye that my BIOS is not configured correctly ( I am not an expert ).
Your help would be welcomed.
40gb hard drive recognized as 10gb
-
- New visitors - please read the rules.
- Posts: 4
- Joined: Mon Jun 05, 2006 8:56 pm
-
- BIOS Guru
- Posts: 3153
- Joined: Thu Mar 21, 2002 8:16 pm
- Location: Near Hannover (CEBIT) Germany
- Contact:
What you shoud try:
Set your 40GB HDD to single-Master and conect it to your motherboard. Do not attach a slave drive (CDROM or second HDD) to this cable.
Start computer and enter Bios. Use the Auto-detect feature of your Bios.
What Cylinder/Head/Sector and size is reported ?
Is LBA auto-enabled ? If not enable manually.
Set your 40GB HDD to single-Master and conect it to your motherboard. Do not attach a slave drive (CDROM or second HDD) to this cable.
Start computer and enter Bios. Use the Auto-detect feature of your Bios.
What Cylinder/Head/Sector and size is reported ?
Is LBA auto-enabled ? If not enable manually.
-
- New visitors - please read the rules.
- Posts: 4
- Joined: Mon Jun 05, 2006 8:56 pm
Thanks for the reply Denniss
I have done as you told me and connected my HDD to mobo as single. I have enabled LBA and the BIOS report is the following:
Size: 10002
cyls: 1216
heads: 255
Precomp: 0
Landz: 19385
Sector: 63
Note that my 10gb HDD reports the same parameters.
Thanks again for your help
I have done as you told me and connected my HDD to mobo as single. I have enabled LBA and the BIOS report is the following:
Size: 10002
cyls: 1216
heads: 255
Precomp: 0
Landz: 19385
Sector: 63
Note that my 10gb HDD reports the same parameters.
Thanks again for your help
Are you used Auto-detect?
More than 100,000 BIOS strings in my database just now!
http:/ /www.kuriaki.has.it/
http:/ /www.supportbios.info
------------------------------------------
Saludos desde Cancun, Mexico
KURIAKI
http:/ /www.kuriaki.has.it/
http:/ /www.supportbios.info
------------------------------------------
Saludos desde Cancun, Mexico
KURIAKI
-
- New visitors - please read the rules.
- Posts: 4
- Joined: Mon Jun 05, 2006 8:56 pm
yes I have used auto-detect
-
- The New Guy
- Posts: 1451
- Joined: Fri Mar 29, 2002 10:32 pm
- Location: Pennsylvania, USA
Are you sure the BIOS was patched correctly?
Can you post its information?
Can you post its information?
CPU - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), i430VX, 128MB EDO.
BIOS patched by BiosMan (Jan Steunebrink).
BIOS patched by BiosMan (Jan Steunebrink).
-
- New visitors - please read the rules.
- Posts: 4
- Joined: Mon Jun 05, 2006 8:56 pm
I found my current BIOS on wims.rainbow-software.org. It said the patched BIOS would support up to 128gb hdd.
Here is the info:
BIOS Type: Award Modular BIOS v4.51 pg
BIOS ID: 11/02/1999-MVP3-586-8661-2A5LEC39C-00
OEM Sing-On: 11/02/1999
Thanks for your help!
Here is the info:
BIOS Type: Award Modular BIOS v4.51 pg
BIOS ID: 11/02/1999-MVP3-586-8661-2A5LEC39C-00
OEM Sing-On: 11/02/1999
Thanks for your help!
-
- The New Guy
- Posts: 1451
- Joined: Fri Mar 29, 2002 10:32 pm
- Location: Pennsylvania, USA
Are you sure it flashed correctly?
Normally, the Wim's team adds something to the BIOS Message line stating it was patched...
Normally, the Wim's team adds something to the BIOS Message line stating it was patched...
CPU - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), i430VX, 128MB EDO.
BIOS patched by BiosMan (Jan Steunebrink).
BIOS patched by BiosMan (Jan Steunebrink).
-
- The Hardware Archivist
- Posts: 6286
- Joined: Wed Mar 20, 2002 7:11 pm
- Location: Netherlands
- Contact:
Not with this one. This is indeed the 128GB version, I downloaded it and checked for the bug, not there.KachiWachi wrote:Are you sure it flashed correctly?
Normally, the Wim's team adds something to the BIOS Message line stating it was patched...
edwin/evasive
Do not assume anything
System error, strike any user to continue...
Do not assume anything
System error, strike any user to continue...
-
- The New Guy
- Posts: 1451
- Joined: Fri Mar 29, 2002 10:32 pm
- Location: Pennsylvania, USA
Um...perhaps that should be updated?
Otherwise...how are we to know for sure that he indeed has the correct file loaded?
Otherwise...how are we to know for sure that he indeed has the correct file loaded?
CPU - DFI 586IPVG, K6-2/+ 450 (Cyrix MII 433), i430VX, 128MB EDO.
BIOS patched by BiosMan (Jan Steunebrink).
BIOS patched by BiosMan (Jan Steunebrink).