My MOBO ECS K7VTA2 PRO. VER 3.1 HAS NO BEEP.

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
jfranz12
New visitors - please read the rules.
Posts: 1
Joined: Sat Mar 01, 2008 2:45 am

Hi to all.

pls. help me to find a solution of my MOBO ECS K7VTA2 PRO. VER 3.1 because it has no. beep, and no display.. pls. give me an solution to figure out this problem.
cp
BIOS Guru
Posts: 1914
Joined: Mon Oct 21, 2002 9:07 pm
Location: Germany

1) check the mainboard for visible damages
2) reset the cmos
3) measure the voltages (atx, vcore, vdimm, vchipset)
4) check if the cpu cooler gets warm (disconnect the cpu fan)
5) sell it on eb*y as untested ;)
If you email me include [WIMSBIOS] in the subject.
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

might be badcaps problem

http://www.badcaps.net
edwin/evasive

Do not assume anything

System error, strike any user to continue...
cp
BIOS Guru
Posts: 1914
Joined: Mon Oct 21, 2002 9:07 pm
Location: Germany

might be badcaps problem
yeah, or the FETs of the switching regulator blown due to the bad caps or just ... anything else :)
If you email me include [WIMSBIOS] in the subject.
Post Reply