Detecting IDE drives ...

BIOS update, EIDE card, or overlay software? (FAQ Hard disk recognition)
Post Reply
emoreira
New visitors - please read the rules.
Posts: 2
Joined: Sun Sep 07, 2008 3:09 am

Hi
I'm reinstalling an old Hewlet Packard PC with Pentium III + 256 Mbytes RAM.

It had a 10 Gbytes Western Digital WD100 HD

I've got a Samsung SV6004H 60 Gbytes HD.

I've installed the new HD and at boot, the PC stalls with the message Detecting IDE drives ....

The BIOS is Award Modular BIOS v6.00PG
Entering SETUP the HD is detected as

IDE Primary Master SAMSUNG SV6004H

BIOS version read is HW.27.06(QHW.06.00)
Procesor detected is Pentium III-MMX 450 MHz

I've read in other sites, that the HD has been tested with a Pentium III (http://www.computerpoweruser.com/editor ... F02h08.asp)

Do I need a BIOS upgrade ?
emoreira
New visitors - please read the rules.
Posts: 2
Joined: Sun Sep 07, 2008 3:09 am

Well, I made it work, but limited to 32 Gbytes.
Is there a way to use the rest of the disk ?
cp
BIOS Guru
Posts: 1914
Joined: Mon Oct 21, 2002 9:07 pm
Location: Germany

read the sticky thread in this section. if you are using Windows XP/2000 or Linux you can use the rest of the disk once the OS is loaded.
If you email me include [WIMSBIOS] in the subject.
Denniss
BIOS Guru
Posts: 3153
Joined: Thu Mar 21, 2002 8:16 pm
Location: Near Hannover (CEBIT) Germany
Contact:

10/19/1999-i440BX-SMC602-6A69KM3JC-00
HW.27.10(QHW.10.01) 128GB BETA

untested

128GB maximum

http://wims.rainbow-software.org/edwin/ ... ems%29.zip
Post Reply