Acer IPIMB-AR Rev 1.02A

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
Porch01
New visitors - please read the rules.
Posts: 1
Joined: Fri Jan 08, 2021 2:43 am

Hello all. I have a Gateway computer purchased in 2013. It is a DX4870-UB318. The motherboard is an Acer IPIMB-AR Rev 1.02A. It fails to boot to the bios. After turning it on, the fans startup and then it basically stops there. Nothing displayed on the screen. I have removed all connections to the motherboard. I have removed the battery for an hour. I have reset the CMOS. I have reseated the RAM sticks. I have tried only one stick of ram (two 4 GB sticks) at a time. I have tried a different power supply. Nothing seems to work. What other trouble shooting steps can I perform? Does someone have a copy of a bios that I can install directly to the mother board and what is the process to do this? Any help would be greatly appreciated. Thank you.
Attachments
20201230_122230 test 2.jpg
Post Reply