61-012A-004500-00111111-071595-440LX

How-to identify your motherboard ?
Post Reply
OptimusCrime
New visitors - please read the rules.
Posts: 10
Joined: Tue Sep 03, 2002 8:54 pm

hey guys (and girls of course),

I can't find the right manufacturer for my Mboard.
With the unibios wizard I get the following information:

BIOS Manufacturer: American Megatrends
BIOS ID: 61-012A-004500-00111111-071595-440LX
BIOS Date: 7/15/95
BIOS ROM Size: 128 K
BIOS OEM Signon: - (empty)
Chipset: Intel 440EX/LX rev 3
Super I/O Chip: ITE 8679 or 8680 found at port 279h

When I look at the AMI Bios number list on this site, the closest I get is:
61-012A-004500-00111111-071595-440LX-PPLX012A-H: Yakumo P686LX

Does it matter that the last set of numbers are different? And what does it mean?

Thanks in advance.

OptimusCrime
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

Yakumo is only reseller. It's PC partner board. Check for 35-8xxx-xx printed on the board and then look at http://www.pcpartner.com/bios/i440.htm#440lx
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

ATX: LXA800D, board should be marked 35-8800-xx somewhere.
Baby AT: LXA801D, board should be marked 35-8801-xx somewhere.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
OptimusCrime
New visitors - please read the rules.
Posts: 10
Joined: Tue Sep 03, 2002 8:54 pm

tnx for the help!! I found the right bios...I'm only in doubt if this is a new update or only the original bios, because I don't see any difference.

OptimusCrime
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

the 012A bit should have changed to 0603.
edwin/evasive

Do not assume anything

System error, strike any user to continue...
OptimusCrime
New visitors - please read the rules.
Posts: 10
Joined: Tue Sep 03, 2002 8:54 pm

ok...it's right now.

Tnx for the help everyone!!

OptimusCrime
John Davies
New visitors - please read the rules.
Posts: 1
Joined: Thu Apr 14, 2005 9:18 am

Upgrade bios for PC partner LXA800D motherboard to enable replacement Hard drive > 8.4 Gb.
Original drive was 6Gb. New drive of 19.4 Gb taken from dead PC, but bios only allowed 8.4 Gb to function.
Original bios AMI-BIOS Version 01.26, Date 15.07.95
BIOS ID : 61-0126-004500-00111111-071595-440LX-PPLX0126-H
BIOS TYPE : American Megatrends Inc. OEM ID: 4500 Chipset : 440LX
Replacement Hard drive FUJITSU MPF3204AT Serial number: 05033528 19.4 Gb
visit http://www.pcpartner.com/support/bios/i440.htm#440lx
under "lxa800d" download the AMI bios Date code 80811. lxa800d.zip unzips 3 files amiflash.com, lx0811ig.rom created 8th October 1998 09:16, and note text
Go to boot disk and under A:\ run amiflash. Replace earlier bios with lx0811ig.rom. Drive now fully functional for full 19.4 Gb. New BIOS ID : 61-0126-004500-00111111-071595-440LX-PPLX0603-H Version 1.20 :lol:
Post Reply