Epox 8KTA3

Da Silva · Thu Sep 19, 2002 6:45 pm

I need some help. On my MB epox I´ve an problem with the boot. The AWARD BOOT BLOCK BIOS, appear and I can´t get boot. I try to make an bootable disk, as the system ask it, but nothing...

N Idea???

Regads

Da Silva
Mozambique

th · Thu Sep 19, 2002 7:36 pm

Tried to hook up the floppy via an old ISA FDD?
You may also try to find someone, whi can flash the Bios offboard...

Bye
Thomas

Thu Sep 19, 2002 7:53 pm

First check your CPU and memory - CPU is common problem on AMD-based boards.

Da Silva · Fri Sep 20, 2002 9:21 am

That´s what I have done.... Change Durom to xp, xp to athlon, but nothing.

Since the BootBlock appear how can I reflash or reprog. the Bios again?

Regards

Da Silva

Fri Sep 20, 2002 10:28 am

Did you read the FAQ on the main Wim's BIOS site ? If the bootblock flash is not looking at your diskette drive, try to get hold of an ISA diskette or multi-IO controller if your board has an ISA slot. Otherwise you will have to try hot-swap flash or get someone to program your BIOS ROM.