Good Morning
I have an Asus P2B-VM mother Board with integrated Sound card (ESS...). I use the integrated soundcard to have sound.
Yersterday, I have flashed my Award BIOS from ASUS P2B-VM rev 1010 to ASUS P2B-VM rev 1011 with Audio_onboard to add a new Hard Disk.
Problem: No more sound, when I start my computer, in the IRQ table, in front of the Mutimedia Device, there is "NA".
I also have a problem in Windows98, in the device manager with a message on the soundcard "No IRQ assigned"
I don't know if it is a problem of revision (may be use the revision without the "on-board audio"), or a BIOS configuration Problem?
NEED HELP!!
Thank you
Bilbo the newbie!!
Integrated sound card problem
Isn't there a setting in the CMOS setup, under "on-board peripherals" or similar, to enable /disable on-board sound ?
Last edited by NickS on Tue Oct 15, 2002 3:02 pm, edited 1 time in total.
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Why did you flash 1011? There's 1012 final ftp://ftp.asuscom.de/pub/ASUSCOM/BIOS/S ... 1012vm.zip and 1014 BETA 003 ftp://ftp.asuscom.de/pub/ASUSCOM/BIOS/S ... 14vm03.zip
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
UniFlash - Flash anything anywhere
Thank you for the link!!
I have flashed my BIOS with the new revision (1012) and I have the sound!!
thank you very munch for help !!
It's better to have the sound when you are watching a film!!
Bye
Bilbo the newbie
I have flashed my BIOS with the new revision (1012) and I have the sound!!
thank you very munch for help !!
It's better to have the sound when you are watching a film!!
Bye
Bilbo the newbie