BIOS Updates forum

The k62-450 in my Azzz PT-5ITL shows as 400mhz when set at 2x=6x@75mhz :? Suspect this is a bios thing because with the jumpers set at 75mhz and any number up to 5x multiplier it is recognized correctly eg 3.5x75=266 but 400 seems an upper limit. The problem is there seems to be a performance fall o...

Success :D Used aminf330 from Rainbow's site (ami flasher with award bios 8O ) and yes the m599lr mobo. Flash took forever but booted at once. The problem? The boot screen now says flash type unknown which is odd because it means the bios doesnt recognise itself! I guess its something to do with tha...

Er, thanks Nick. Just realized the chip was a Winbond W49F002U :oops: Where do I go from here? Tried the recommended AWDflash flasher but that wont proceed because it says wrong chipset. Assume that means it doesnt work with the VIA chipset in the Soyo board being used for the hotflash. Still got th...

Tried to hotflash with v1.1 and v1.1e bios codes downloaded from ECSUSA website. Nothing works. With a working chip the flash freezes and the old bios is still there.
Does anyone have a working bios or am I downloading it wrongly somehow? Help much appreciated

CD lights up and HDD starts but thats it. Classic BSOD.
I just wondered if there was a known bug with Uniflash and this Windbond chip or whether there was some way to overwrite the badflash and start again. I'm running out of spare bios chips

Another day, another badflash. 8O Wanted to upgrade to an Athlon Xp 1800 which needs a bios update from v1.1 dated 5.31.01 to v1.1e. (Or does it?) Started badly - save present file not possible under Uniflash 1.28. Went ahead and after flash got verification error. Does this mean the chip is fried o...

Thats a Jetway 530CF. See www.jetway.com.tw/evisn/download/
Under the bios section there is a latter upgrade dated 09/27/2k but that appears to be only support for AMD K2 500+ cpus
What exactly is the usb problem? Mine is ok.

Fantastic AJZChips. Posted first time after a succesful flash with the bios file you sent :D Correct date of 30/09/2000 and recognises my AMD K550 which was the point of the upgrade in the first place. I can recommend Uniflash 1.28 Well there were two problems. The ASD bios chip showed verification ...

Thanks Rainbow. Uniflash 1.28 recognizes the bad bios chip and the chipset of the good motherboard Guess everything is alive at least :D The error message now is: bios file not found. Does that means I need a working M599LR bios? The PC Chips Netherlands web site is gone so does anyone out there kno...

At the risk of crossposting (and soupy banning me :twisted: ): The badflash is a pc chips m599lr v1.4 where I used the infamous 2k1222s update. Assume I need 2k0930. The bios chip is ASD 29F2008 in a SIS 530. The good mobo is a Soyo SY5EMA+ v1.1 with an ETEQ chipset. Different bioses of course: AMI ...

The hot flash is giving error messages: With aminf323 /soldbios.rom it says wrong chipset via With aminf323 2k0930s.rom it says file too large Any ideas? Im amazed the motherboard sitting on the kitchen table works - perhaps I know more about computers than I think :lol: Of course getting a pc chips...

One question before I try this.
When do I take out the reflashed chip? I recall after the flash it says "computer will now restart" Do I let that happen or should this be stopped and the chip taken out at this point?
Thanks

The flash seemed to go ok. Memory test is fine and get Bad Checksum error as predicted. But after pressing F1 get blinking cursor and blackscreen. Clear CMOS does same. Assume the AMIBOOT.ROM thing doesnt work because there is a boot block but the wrong one. Nothing to hot flash with. Any ideas or m...

Nothing to id this board. Its a socket 7 with a via vt82c686a chipset. Onboard video = via pc100. sound = soundpro, 2 usb, and ps2 ports. 2 dimms only and only 1 ide. A sticker says 00D009F2B841. I cant see any voltage jumpers or multipliers so am reluctant to put in a cpu to test. Can anyone help p...

Hey, thanks guys. Would never have heard of Jama without your help. Ive found the VIA southbridge chip so the id is confirmed. No need for a bios update as mine is the old version. Ill try and assembly the mobo with my 800 Duron and post back, hopefully to report success! BTW if these boards are tur...