i want to burn my bios chip winbond w29c020p-12 plcc that is damaged
and i need pinouts for dip to plcc adapter to make it myself
any help ???
greedz
gsmpower
dip to plcc adapter pinouts
Get datasheet for Winbond W29C020 at http://www.winbond-usa.com/products/win ... 9c020c.pdf. There's pinout for both DIP and PLCC versions so the adapter should be easy to do.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
UniFlash - Flash anything anywhere
-
joegib
- New visitors - please read the rules.
- Posts: 10
- Joined: Fri Mar 22, 2002 8:43 pm
- Location: London, UK
There is a schematic for a DIL32 —> PLCC32 adapter here:
http://se-ed.net/mpu51/eprom/eprom.html#SCHPCB
The PCB is fairly big so you need to raise it to avoid obstructions like capacitors, ISA/PCI slots etc. I used a stack of DIL32 sockets.
http://se-ed.net/mpu51/eprom/eprom.html#SCHPCB
The PCB is fairly big so you need to raise it to avoid obstructions like capacitors, ISA/PCI slots etc. I used a stack of DIL32 sockets.
