Twinhead bad bios flash

Hot-swapping and Boot-Block flash & Boot block flash and floppy support
Post Reply
dannyo
New visitors - please read the rules.
Posts: 7
Joined: Thu Oct 05, 2006 8:44 pm

I downloaded the bios from the Twinhead site for my laptop and now it comes up like a bad video driver.The unit is a b750 with Insyde bios.The website show a n7600/b750 as being the same but they must not be.There has got to be someone who can reprogram or get me a new chip, PLEASE HELP ME!
ajzchips
El cheapo dude
Posts: 3048
Joined: Sat Mar 23, 2002 12:41 pm
Location: Madrid, Spain

dannyo wrote:now it comes up like a bad video driver
Could you explain that a bit?
dannyo
New visitors - please read the rules.
Posts: 7
Joined: Thu Oct 05, 2006 8:44 pm

Well the screen was totally garbled millions of lines and mostly dark, but I did figure out by reading lots of other posts here that REALLY helped me.The unit did still power up to a post beep after reseting bios.Then I hit F1 to continue to boot of the flash floppy.I then did a "blind" re-flash on the bios after realizing there were two different files included that had to be used.Thanks to lack of any kind of information from the Twinhead site. But I would like to say thanks to ALL of you guys for being here.
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

So in essence you flashed it with the proper file and all is OK now?
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Post Reply