Page 1 of 1

NUC11TNBV5

Posted: Sat Nov 29, 2025 5:41 pm
by Nio9345
Hello!!

I would like your help if possible.

I have 2 NUC11TNBV5 that do not boot after failed bios update.

The symptoms after the failed update are as follows:

When I plug the power source, after 5 secs maximum the NUC turns on on it's own and after 5 secs again the power button is starting flashing white constantly.

I used CH341 black to dump the bios and after downloading the correct bios from ASUS I used NeoProgrammer to flash it.

Unfortunately, the same issue still occurs. Am I boned and some firmware like PD chip, is also bricked and prevents the post from completing? :(