M747 FSB Speed
Does anyone know how to change the FSB speed from 66 to 100 Mhz on the pcchips m747 version 1.5 motherboard? 66 with my 450 processor is killing the system with frequent and inconvienient lockups. If someone could help me it would be appreciated. Thanks all!
If it locks-up at 66, it'll only get worse at 100.
Anyway, the manual is at http://go.to/ajz
Anyway, the manual is at http://go.to/ajz
Thanks for the reply. My processor is designed for a 100 Mhz bus speed. The manual for my MoBo (m747 v1.5) says nothing about how to change the FSB. I am lost dude! Really. Any tips? Great site by the way. A lot of info there on pcchips boards. I iked it!
heya man, try to flash the newest bios! this will help a lot! Anyway, this mobo is the one of the bigest shitz i have ever seen and used!griffin wrote:Thanks for the reply. My processor is designed for a 100 Mhz bus speed. The manual for my MoBo (m747 v1.5) says nothing about how to change the FSB. I am lost dude! Really. Any tips? Great site by the way. A lot of info there on pcchips boards. I iked it!
this is the bios file u r lookin' for...gl_st0rm wrote:heya man, try to flash the newest bios! this will help a lot! Anyway, this mobo is the one of the bigest shitz i have ever seen and used!griffin wrote:Thanks for the reply. My processor is designed for a 100 Mhz bus speed. The manual for my MoBo (m747 v1.5) says nothing about how to change the FSB. I am lost dude! Really. Any tips? Great site by the way. A lot of info there on pcchips boards. I iked it!
ftp://ftp.pcchips.com.tw/bios/m747/v1.5/1208s.rom
...or watch this http://www.pcchips.com.tw/BIOS.html for different one
That's old 1998 BIOS. The latest one is 990629S at http://go.to/ajz.
This board has CPU Plug&Play - set the correct FSB in BIOS SETUP.
This board has CPU Plug&Play - set the correct FSB in BIOS SETUP.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
UniFlash - Flash anything anywhere
oldie but goldieRainbow wrote:That's old 1998 BIOS. The latest one is 990629S at http://go.to/ajz.
This board has CPU Plug&Play - set the correct FSB in BIOS SETUP.
, i have tested this one and it works well!this board is too very o'c friendly, it allowed to me run my celi 266 at 400Mhz
just simple setting in bios is enought...if u still will have troubles with running your cpu at 100Mhz FSB, try to search what pin B21 on slot1 CPUs do, u will be very surprised