Hey, guys....
Some people have given me 2 computers...
Now I'm going to make a Linux server.
The big problem, is that I take the mobo out of the one compter and put it into the other. And now, I dunno, which is the right way of the cables, I mean how to put them onto the mobo (-> the Led, Reset, HDD, Turbo.... cables)
Because the boards are different and I need now a manual, or I need the name of this board, I have just this information, which were on the chips of the board:
ALI
M1489 A1
9532 TS7
B38936SC
ALI M1487 B1
9546 TS5
AC7182SB
AMIKEY (tm)-2
9539
(c)'85-'92 Am. Megatrends Inc.
486 Award Software Inc
T2108081
(c)1984-1996
SMC
FDC37C665GT
A9540-E247-AIC
6T76783-6
For the ram 4 of this chips:
W24M512AK-15
95211
This was printed onto it: PCI48AF-3.00
And I guess, that there was a 133 Mhz AMD x586 processor on it.
It would help me a lot, if you can identify my board and help me to find the manual, or to insert this cables onto the board correctly.
Need help, can't identify motherboard and need a manual
Looks like TMC PCI48AF.
http://www.differentpla.net/~roger/hardware/pci48af/
http://www.groove-trax.de/jumper/m/S-T/32988.htm
http://www.differentpla.net/~roger/hardware/pci48af/
http://www.groove-trax.de/jumper/m/S-T/32988.htm
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
UniFlash - Flash anything anywhere