Hello,
I have a 40 GB IBM and a 120 GB maxtor.
Both HDD can not be reconized by the bios.
Program: Unicore BIOS Wizard Version 1.5
Program: Unicore Chip Detect v0.72 2000.03.10
BIOS Date: 10/20/98
BIOS Type: Award Modular BIOS v4.51PG
BIOS ID: 10/20/1998-i440BX-W977-2A69KM4GC-00
BIOS Eval: W6156ZXF1 V1.0 022299
Chipset: Intel 440BX/ZX rev 3
Superio: Winbond 977TF rev 0 found at port 3F0h
I don't know if the update runs on DOS or Windows.
So I need some information how to upgrade my bios.
I tried to find an update but never suceeded.
Any help will be appreciated.
Thanks and regards,
Vijay
120GB: 10/20/1998-i440BX-W977-2A69KM4GC-00
-
- BIOS Guru
- Posts: 3153
- Joined: Thu Mar 21, 2002 8:16 pm
- Location: Near Hannover (CEBIT) Germany
- Contact:
http://www.msi.com.tw/program/support/b ... =MS-6156ZX
Read the collected wisdom files or the main page FAQ how tu update Bios !
Biosfile should include readme file
Read the collected wisdom files or the main page FAQ how tu update Bios !
Biosfile should include readme file
Thank you Denniss but I still can't see my harddrive.
I have set the hardrive in "cable select" jumper configuration and when I start "fdisk" the program see only 19 GB. My harddrive has a capacity of 120 GB.
Here is my bios update info:
Program: Unicore BIOS Agent Version 1.8
BIOS Date: 07/27/00
BIOS Type: Award Modular BIOS v4.51PG
BIOS ID: 07/27/2000-i440ZX-W977-2A69KM4GC
BIOS Eval: W6156ZXMS V1.6 100900
Chipset: Intel 440BX/ZX rev 3
Superio: Winbond 977TF rev 0 found at port 3F0h
Please help me. What do I wrong??
With kind regards,
Vijay
I have set the hardrive in "cable select" jumper configuration and when I start "fdisk" the program see only 19 GB. My harddrive has a capacity of 120 GB.
Here is my bios update info:
Program: Unicore BIOS Agent Version 1.8
BIOS Date: 07/27/00
BIOS Type: Award Modular BIOS v4.51PG
BIOS ID: 07/27/2000-i440ZX-W977-2A69KM4GC
BIOS Eval: W6156ZXMS V1.6 100900
Chipset: Intel 440BX/ZX rev 3
Superio: Winbond 977TF rev 0 found at port 3F0h
Please help me. What do I wrong??
With kind regards,
Vijay
Do you have the right cables to use cable select ? Try setting master/slave instead.vijay wrote:I have set the hardrive in "cable select" jumper configuration
What OS ? If W98, look at Microsoft: FDISK limitations on drives >64Gb.and when I start "fdisk" the program see only 19 GB. My harddrive has a capacity of 120 GB.
Vijay
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"