2 weeks in despair..
2 weeks..... 2 weeks of countless hours spent over the trying to pull the thorns in my brain that's been bugging me I have 2 piece of junk I might suppose that is really giving a hard time that's what brought me here.. a dead lenovo s10-3c, i've mistakenly select the option in the flashing menu to "program all blocks" and restart after completing the process of programming all the blocks & now it has no display, only power led,caps lock & num lock led are on although the fan spins but nothing is shown in the display I also have an acer 4735z which has also no display, tried several tricks using bootblock recovery method using flashdrive but no success.. I hope someone here could guide me.. more power to everyone!!!
-
- The Hardware Archivist
- Posts: 6286
- Joined: Wed Mar 20, 2002 7:11 pm
- Location: Netherlands
- Contact:
The lenovo:
http://support.lenovo.com/en_US/downloa ... D=DS026008
The Acer:
http://www.nvidiadefect.com/acer-aspire ... t1605.html
That video chip is most likely a known defective one. Good luck.
http://support.lenovo.com/en_US/downloa ... D=DS026008
I guess not doing this? Off to the Lenovo support center it is.For Vista and Windows 7, you may run it as administrator by left-clicking on the icon and selecting "Run as administrator".
The Acer:
http://www.nvidiadefect.com/acer-aspire ... t1605.html
That video chip is most likely a known defective one. Good luck.
edwin/evasive
Do not assume anything
System error, strike any user to continue...
Do not assume anything
System error, strike any user to continue...