Questions that don't belong in the other forums.
#45657 by Phatsacks
Fri Aug 03, 2007 10:50 pm

I have the Aopen MP915-B MiniPC which uses the Phoenix AwardBIOS v6.

If the power is cut 100% from the computer I have to press F1 the next time it's plugged in. This is an issue because I'd like to install it in my car.

I am trying to see if there is a way to bypass the: Checksum Error: Defaults loaded (which requires F1 to continue). Due to the battery issue, when I select the Halt On (no errors) option, it doesn't save. I was hoping to build a bios with this as the default option, then flash it.

Is there a bios builder/mod that will allow me to set the default Halt On - No Errors? I don't see it in either modbin6 or awdbedit.

Any help is appreciated, and sorry if this is in the wrong forum, I wasn't sure which one seemed the best.

It's not the battery, it's the battery holder.

I have put in two known good and tested batteries.

The motherboard is outside the warranty date.

The actual bios file name is Aopen MP915-B Bios R1.08TB (bios image below for reference)

Last edited by Phatsacks on Sat Aug 04, 2007 12:23 pm, edited 1 time in total.