set CPU clock to 400MHz, now my computer wont even start up. Nothing appears on my monitor. HELP!
2gb PC 3500 ram
3.2 ghz processor w/ HT enabled
found no reason that this setting wouldnt work so i decided to try it. big mistake...need computer for school tomorrow...
DFI LanParty Pro - Intel 875 chipset
Clear CMOS (see the manual).
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
UniFlash - Flash anything anywhere
Is your RAM labelled PC3200 (PC500?) and NOT 200MHz or 400MHz. If it is labelled as MHz rather than PC3200 it may not be true PC3200 RAM.
Also, have you good quality memory? I usually stick to Hynix or Kingston, but apparently Kingston is have some problems at present. I have also used PQI which seems to be fine except that I have not yet tried it on a good range of models and brands of boards to be sure.
Also, have you good quality memory? I usually stick to Hynix or Kingston, but apparently Kingston is have some problems at present. I have also used PQI which seems to be fine except that I have not yet tried it on a good range of models and brands of boards to be sure.