Pwa-Pwa Camaro Manual Please!! Need USB Pin outs

Request help finding jumper settings or a motherboard manual.
Post Reply
Bsitsme
New visitors - please read the rules.
Posts: 1
Joined: Wed May 26, 2004 6:29 pm

I have a Pwa-Pwa Camaro socket 7 board I need a manual for the USB2 Pin out configuration
Its running Compaq Rompaq bios so I dont have a string (doesnt show one) I do have some Numbers off the board :
assy #:411701500005-B
Pwa-Pwa-Camaro
Pcb-Twa-Camaro
311c4p041nw
zonxar
Master Flasher
Posts: 197
Joined: Thu Mar 21, 2002 7:26 pm
Location: Airdrie, Alberta, Canada

This is an OEM Mitac 5114VU motherboard. Only info so far is here:
http://www.resellerratings.com/forum/t80202.html
Same problem as you have, but haven't found which wires from USB cable to connect to which pins...
:(
Toby B
Compaq-Fu Master
Posts: 168
Joined: Sun Jun 02, 2002 11:36 am
Location: Augusta, ME
Contact:

http://www.s87841630.onlinehome.us/mode ... amaro.html

The front USB ports are connected to the board via a small ribbon cable. The only way to get the info you are looking for at this point would be to use the ribbon cable that came with the Compaq case and a multimeter.
Compaq-Fu Master
testparm
New visitors - please read the rules.
Posts: 1
Joined: Fri Jan 25, 2008 1:24 am

Hi, i´ve been multitest the USB expansion board. the USB pinouts in the motherboard scheme (printed as USB2) is:

1-ground
2-ground
3-data1+
4-data1-
5-VCC
6-VCC
7-data2+
8-data2-
9-useless
10-doesn´t exists

the grounds and vcc are common for both ports. the 3 and 4 pins are for port1. the number 7 and 8 pins are for port2.



disculpen el mal inglés.
saludos y éxitos.

pd: this may help http://pinouts.ru/Slots/USB_pinout.shtml
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

Thank you/gracias 8)
edwin/evasive

Do not assume anything

System error, strike any user to continue...
Post Reply