I have a Pwa-Pwa Camaro socket 7 board I need a manual for the USB2 Pin out configuration
Its running Compaq Rompaq bios so I dont have a string (doesnt show one) I do have some Numbers off the board :
assy #:411701500005-B
Pwa-Pwa-Camaro
Pcb-Twa-Camaro
311c4p041nw
Pwa-Pwa Camaro Manual Please!! Need USB Pin outs
-
zonxar
- Master Flasher
- Posts: 197
- Joined: Thu Mar 21, 2002 7:26 pm
- Location: Airdrie, Alberta, Canada
This is an OEM Mitac 5114VU motherboard. Only info so far is here:
http://www.resellerratings.com/forum/t80202.html
Same problem as you have, but haven't found which wires from USB cable to connect to which pins...
http://www.resellerratings.com/forum/t80202.html
Same problem as you have, but haven't found which wires from USB cable to connect to which pins...
http://www.s87841630.onlinehome.us/mode ... amaro.html
The front USB ports are connected to the board via a small ribbon cable. The only way to get the info you are looking for at this point would be to use the ribbon cable that came with the Compaq case and a multimeter.
The front USB ports are connected to the board via a small ribbon cable. The only way to get the info you are looking for at this point would be to use the ribbon cable that came with the Compaq case and a multimeter.
Compaq-Fu Master
Hi, i´ve been multitest the USB expansion board. the USB pinouts in the motherboard scheme (printed as USB2) is:
1-ground
2-ground
3-data1+
4-data1-
5-VCC
6-VCC
7-data2+
8-data2-
9-useless
10-doesn´t exists
the grounds and vcc are common for both ports. the 3 and 4 pins are for port1. the number 7 and 8 pins are for port2.
disculpen el mal inglés.
saludos y éxitos.
pd: this may help http://pinouts.ru/Slots/USB_pinout.shtml
1-ground
2-ground
3-data1+
4-data1-
5-VCC
6-VCC
7-data2+
8-data2-
9-useless
10-doesn´t exists
the grounds and vcc are common for both ports. the 3 and 4 pins are for port1. the number 7 and 8 pins are for port2.
disculpen el mal inglés.
saludos y éxitos.
pd: this may help http://pinouts.ru/Slots/USB_pinout.shtml
