I have a motherboard that on back is write: Elpina BA E - VO 9814.
I need the manual and drivers if its exists.
In this forum I found references for Elpina BA E - VO 9801 and 9809. I try all sugestions of this references.
I know this is a PCChips motherboard and I try
- http://go.to/ajz
- http://go.to/th2
- www.pcchips.nl
- othes pcchips web site
I try too:
- 'http://www.stud.fernuni-hagen.de/q3998142/pcchips/' and use 'DO NOT KNOW' link, fill in info and search. But the results are not good for me.
Any help is welcome, thanks in advanced
bridgewhisper
Manual for Elpina BA E - VO 9814
-
- New visitors - please read the rules.
- Posts: 6
- Joined: Sat Sep 11, 2004 10:30 pm
Hi ajzchips
Yes, I can boot it.
Features of my motherboard :
- On back side of motherboard is write: Elpina BA E - VO 9814.
- On chip BIOS is write:
- BURN-IN
- 24HR
- AMIBIOS
- 586 1985-95
- AMERICAN MEGATRENDS
- BK 5 5 2 4 7
- Theres only one socket for processor, is write on it 'SOCKET 7'.
- There are 4 slots PCI
- There are 3 slots ISA
- There is no slot AGP
- There are 4 slots to memory EDO (73 pins)
- There are 2 slots next to EDO's slots (I believe that is for other type of memory). These 2 slots are bigger than EDO's slots
- I can not identify chipset because there's nothing wrote on it.
I think if 'BK55247' is BIOS ID. If I were wrong, please, how can I take the BIOS ID?
I took pictures of my motherboard for you, but is impossible to send them by this forum. So I send for you by email on ajzchips@wimsbios.net with subject "PCChips".
Thank you very much for help.
bridgewhisper
Yes, I can boot it.
Features of my motherboard :
- On back side of motherboard is write: Elpina BA E - VO 9814.
- On chip BIOS is write:
- BURN-IN
- 24HR
- AMIBIOS
- 586 1985-95
- AMERICAN MEGATRENDS
- BK 5 5 2 4 7
- Theres only one socket for processor, is write on it 'SOCKET 7'.
- There are 4 slots PCI
- There are 3 slots ISA
- There is no slot AGP
- There are 4 slots to memory EDO (73 pins)
- There are 2 slots next to EDO's slots (I believe that is for other type of memory). These 2 slots are bigger than EDO's slots
- I can not identify chipset because there's nothing wrote on it.
I think if 'BK55247' is BIOS ID. If I were wrong, please, how can I take the BIOS ID?
I took pictures of my motherboard for you, but is impossible to send them by this forum. So I send for you by email on ajzchips@wimsbios.net with subject "PCChips".
Thank you very much for help.
bridgewhisper
Downloading the pictures right now. But since it boots, could you please try running BIOS AGENT and post its results here?
http://www.unicore.com/biosagent/index.cfm
http://www.unicore.com/biosagent/index.cfm
Just checked... you have a PCCHIPS M571, of which there are several versions, depending on their Super I/O controller. You'll find the version number printed somewhere on your mobo (I couldn't see it) and most likely near the keyboard connector.
Chances are: V3.2(a) or V7.x (these are the most common).
Chances are: V3.2(a) or V7.x (these are the most common).
-
- New visitors - please read the rules.
- Posts: 6
- Joined: Sat Sep 11, 2004 10:30 pm
Hi again ajzchips !
Sorry, my english is not so good. If I were wrong, please correct me:
'Super I/O controller' = BIOS
'mobo' = MOtherBOard
I'm working now, but I take BIOS AGENT. I will send BIOS AGENT results soon as possible (tonight or tomorrow).
I believe you couldn't see the version number because the pictures are not good. That's right? So I will seek for the version number too.
You are very helpful, thanks again.
bridgewhisper
Sorry, my english is not so good. If I were wrong, please correct me:
'Super I/O controller' = BIOS
'mobo' = MOtherBOard
I'm working now, but I take BIOS AGENT. I will send BIOS AGENT results soon as possible (tonight or tomorrow).
I believe you couldn't see the version number because the pictures are not good. That's right? So I will seek for the version number too.
You are very helpful, thanks again.
bridgewhisper
-
- New visitors - please read the rules.
- Posts: 6
- Joined: Sat Sep 11, 2004 10:30 pm
I'm going to disassemble my computer to seek version number.
Thanks again
bridgewhisper
Thanks again
bridgewhisper
-
- New visitors - please read the rules.
- Posts: 6
- Joined: Sat Sep 11, 2004 10:30 pm
Hi !
I found the Version Number, it's V3.2
It covered with a piece of paper, and it was where you said, near the keybord conector.
Now I can find the manual and drivers (I believe).
Thank you very very much ajzchips.
bridgewhisper
I found the Version Number, it's V3.2
It covered with a piece of paper, and it was where you said, near the keybord conector.
Now I can find the manual and drivers (I believe).
Thank you very very much ajzchips.
bridgewhisper
Hi ! bridgewhisper,
I'm looking for the same information of the motherboard "Elpina" BAE-VO 9814 v3.2 - and I found these good notices :
http://m571.com/m571/M571v13.htm
http://m571.com/m571/howtoflashyourbios.htm
http://m571.com/m571/jumpers.htm
and for more, this one...
http://66.102.9.104/search?q=cache:OJQC ... 9814&hl=fr
My first interest are the sound and graphics drivers for this motherboard, because I havn't any driver or another thing altogether of this motherboard.
All drivers are here : http://m571.com/m571/index.htm
Did you find them ?
Sorry, my english is not so good !!!
Thanks and Bye, bye !!!
Pathel
I'm looking for the same information of the motherboard "Elpina" BAE-VO 9814 v3.2 - and I found these good notices :
http://m571.com/m571/M571v13.htm
http://m571.com/m571/howtoflashyourbios.htm
http://m571.com/m571/jumpers.htm
and for more, this one...
http://66.102.9.104/search?q=cache:OJQC ... 9814&hl=fr
My first interest are the sound and graphics drivers for this motherboard, because I havn't any driver or another thing altogether of this motherboard.
All drivers are here : http://m571.com/m571/index.htm
Did you find them ?
Sorry, my english is not so good !!!
Thanks and Bye, bye !!!
Pathel
The DO KNOW section of the PCCHIPS LOTTERY: http://go.to/th2 will be more than enough to solve your problem.
-
- New visitors - please read the rules.
- Posts: 6
- Joined: Sat Sep 11, 2004 10:30 pm
Thanks a lot !!!
All these information was very helpfull, everything is fine now.
You're very very helpful, thanks a lot again. And have a nice weekend.
bridgewhisper
All these information was very helpfull, everything is fine now.
You're very very helpful, thanks a lot again. And have a nice weekend.
bridgewhisper