my ps2 in mymother board did not work

Ask a question about your computer setup.
Post Reply
BIOS Newbie
Posts: 16
Joined: Tue Jun 11, 2002 5:25 am

i have ps2 in my mother board did not work i replaced the port which is to ps2 with another but it is not work also what can i do

my motherbord is luckytech p6ex3
El cheapo dude
Posts: 3048
Joined: Sat Mar 23, 2002 12:41 pm
Location: Madrid, Spain

You might have an "Enable PS/2....." in BIOS. Check that.
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia

If the PS/2 keyboard works but the PS/2 mouse does not, check the BIOS settings.
If the keyboard does not work, check if it's connected to the correct port (the bottom one). If the keyboard LEDs don't blink after power up, the fuse on the board is probably blown and needs to be replaced.
Patched and tested BIOSes are at
UniFlash - Flash anything anywhere
Post Reply