60GB: ATC-6260

BIOS update, EIDE card, or overlay software? (FAQ Hard disk recognition)
Post Reply
XHP579
New visitors - please read the rules.
Posts: 6
Joined: Wed Jun 26, 2002 1:15 pm

:roll: Hi, everyone there,
Finally, I made it. the old stuff still working.

My ATC-6260 mobo is working. Config. as follows:
ATC6260 Dual-CPU mobo
2xPII 400MHz@400MHz
1xIBM 4GB IDE HD at IDE1 Master with Win98SE
1xIBM 9GB SCSI HD with Win2K
1xIBM 60GB IDE HD at IDE1 Slave
1xSamsung CD-ROM drive
ATI Radeon VE DDR Display Card with 64MB

The problem I have is very strange. The USB does not work under Win2K. By checking Device Manager, I'm told the system has not provide enough info on this device and asks to contact the supplier for BIOS upgrade. The question is why USB is working under Win98SE.
I need BIOS upgrade also for the HD>60GB. Right now, I'm using DDO to let system accept the capacity.
Can anyone tell me where I can get the BIOS upgrade for:

Award Modular BIOS v4.51PG
BIOS code: i440BX-W977TF-ATC-6260C-VH

Any information and advice would be appreciated very much.

Thanks
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

I sent you patched BIOS which should work with HDDs up to 64GB.
Do you have "Assign IRQ for USB" enabled in BIOS setup?
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
Post Reply