Dead Board Tyan 2644n
This new board Tyan 2644n is dead. I flashed the BIOS with correct download and later. not then it wouldn't start ... nothing.. no video ..beep or anything. I traded the chips (running dual 1800's) video card nothing. All I get is the monitors little "you have no video" pic. Now I think this must be the BIOS because of the flash but I have had the same symptoms intermittently for weeks now..usually I can reboot a few times or turn it off for a bit and im back up and going. Any ideas please please do tell Im ready to send it swimming...Thanks
If it works intermittently, I don't think it's the BIOS.
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Make sure that you have strong enough power supply - it's VERY power hungry with dual CPUs - is that board for dual AMDs? 350W or even more might be required then.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
UniFlash - Flash anything anywhere