Hi !
I'm searchin for a manual for the following board.
GMB-486sg V2.2 made by Gemlight/Vextrec (or Vextrek?)/DTK (OEM)
This one should be the right one but is passwordprotected
http://america.hongfaith.com/Support/manual_update.htm
This one seems to be ok but whatever I jumper, the board allways says somethin about an unknown cpu. (I did test with an intelDX2-66)
http://home.planet.nl/~faase009/GMB-486SG.html
And this one is for rev 3.06 and doesnt match
http://www.bigedtech.com/oldbigedtech/D ... /486sg.htm
An hour later : found some more sites but none with rev2.2
Any other sources ??
I would be happy to find somethin cos this board should be reactivated als linuxrouter
thanx
Rado
GMB-486sg v2.2
Well, if the board is "saying" it doesn't recognise it, it's probable that the BIOS does not recognise it. Is your BIOS flashable ?Rado wrote:This one seems to be ok but whatever I jumper, the board allways says somethin about an unknown cpu. (I did test with an intelDX2-66)
http://home.planet.nl/~faase009/GMB-486SG.html
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
-
- Mobo-Fu Master
- Posts: 119
- Joined: Mon May 13, 2002 11:20 pm
- Location: Ottawa, Ontario, Canada
- Contact:
Well here is Version 6.03 of the manual for v2 of the board.
http://mobokive.dyndns.org/Archive/Geml ... 6sg603.pdf
That might be more helpful.
Also the DTK PKM-0038S is an OEM version of the same board. Might want to check out thier site.
http://www.dtk.com.tw/download.html
http://mobokive.dyndns.org/Archive/Geml ... 6sg603.pdf
That might be more helpful.
Also the DTK PKM-0038S is an OEM version of the same board. Might want to check out thier site.
http://www.dtk.com.tw/download.html
"Imagination is the only weapon in the war against reality." -Jules de Gautier
-
- The Hardware Archivist
- Posts: 6286
- Joined: Wed Mar 20, 2002 7:11 pm
- Location: Netherlands
- Contact:
Already trying to work things out. I've got a v5.00 of the manual that has jumpers up to JP35, it seems the best match so far.
edwin/evasive
Do not assume anything
System error, strike any user to continue...
Do not assume anything
System error, strike any user to continue...