no video/ power supply
-
- New visitors - please read the rules.
- Posts: 2
- Joined: Thu Dec 19, 2002 10:42 am
my power supply blew and i got a new one after i installed it i went to turn the computer back on and i had no video. i cpu powers and the drives start to run but i can't see anything. someone told me to clear the cmos so i did that. i was also told to reseat the ram and video cards. i did that and still no luck. i believe it is a bios problem but don't know how to fix it. it's a spacewalker with a petium 2 in it. and i have tried other video cards but they didn't work either.
I'm afraid that the PSU burnt something... Test all components separately to find which ones are bad.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
UniFlash - Flash anything anywhere
-
- New visitors - please read the rules.
- Posts: 2
- Joined: Thu Dec 19, 2002 10:42 am
i pulled everything out but the mother board and the floppy. the floppy runs but still nothing. not sure what you meant by pulling everything but i think this is what you meant if not please clarify.
Can you test the CPU, RAM and video in another motherboard ?
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"