Don't ask how to over-clock.

#38820 by rjvan
Sun May 14, 2006 11:28 pm
Recommended by Wim's BIOS... BIOS Agent scan: Upgrade your BIOS! DriverMax is the number one driver updater for Windows 8.1, Windows 8, Windows 7, Vista or XP

#38820 by rjvan
Sun May 14, 2006 11:28 pm
Well, according to that manual it IS a S370-L, which IS 133FSB AND Coppermine compatible. Also - my board actually goes up to 150FSB with jumpers (the AGP card was blocking the silkscreen). So it also supports 133FSB. I've set the proper voltage on the slotket (using the manual for 1.7v), I've tried the FSB at 66, 100, 133 - I completely give up. The processor's toast. As for that good ol' celly - it won't run at 75FSB either .. anything over 66 and it just won't boot. :| Yippee for the PII @ 495Mhz (4 x 124FSB)