#15385 by luncheonticket
Fri Apr 04, 2003 2:45 am
i need to reflash a dead pcchips m800lmr with the hot-swap (or whatever its name is) method. i already did it before, so i just need some data:
1. voltage of the 'atmel 49f002nt' flash rom to be able to flash it
2. can i use a m560tg motherboard to reflash the bios using the hotswap method (i don't have another m800, and this m560tg is only board i can risk to ruin if something goes wrong)
3. where can i get the rom file? (it cannot be found in pcchips' website, and ajz's site is down)
4. should i use amiflash or uniflash?

thanx in advance

LT