I think that could just be sloppy writing. I bet he couldn't fit a standard SDRAM DIMM into the Small Outline DIMM socket.....without a crowbar. Like KachiWachi says, chip technology is the important thing - how many chips on that 128Mb SODIMM ?KachiWachi wrote:The FAQ for your board says "The 6020/6020+ supports 3.3V PC 66/100MHz SDRAM DIMMS Non-ECC. You can purchase memory from most computers suppliers." ...so an SoDIMM won't work...
Bad flash results, any help is appreciated.
Tested patched BIOSes. Untested patched BIOSes.
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"
Emails *will* be ignored unless the subject line starts "Wim's BIOS forum"