FIC? bios update

Questions that don't belong in the other forums.
elpinchegringo
New visitors - please read the rules.
Posts: 11
Joined: Wed Jun 26, 2002 11:02 pm
Location: Santa Rosa, CA
Contact:

BIOS VERSION: 3.02E703

RELEASE DATE: 10/21/95

AMI BIOS id: 2A59CF0JC-00

I can't find the appropriate update/info at fic's website. F0 is supposed to represent FIC, but I can find no reference to a model represented by the J.

Thanks,

Russell
ajzchips
El cheapo dude
Posts: 3048
Joined: Sat Mar 23, 2002 12:41 pm
Location: Madrid, Spain

I'd say it's a FIC PT-2003 (PCB 1.3) "E"-type BIOS.
I'd wait for a second opinion if I were you.

Anyway, do check your motherboard for "PT-2003" (hopefully), since FIC usually label their boards.

The BIOS is of early 1996, so I suppose the main difference with yours will be support for HDDs upto 8GB. Is yours limited to 2GB? (just curious).
elpinchegringo
New visitors - please read the rules.
Posts: 11
Joined: Wed Jun 26, 2002 11:02 pm
Location: Santa Rosa, CA
Contact:

It is a PT-2003. I cracked open the box when I got home from work and looked at it. There is a bar code sticker with PT-2003 written on it.

I also contacted FIC Tech Sup. They told me the correct bios to download, which introduces my next problem.

When I was satisfied that I had the correct bios update, I put it onto a bootable floppy with the update utility (flash531.exe). I then followed the instructions downloaded from the FIC website. I enter "flash531 306de803.bin." The updater app loads up and seemingly begins to read the .bin file. I am supposed to be prompted to save my old bios, but I am never given the option. After about 10 seconds, the floppy just stops spinning and nothing else happens.
Is yours limited to 2GB?
Yes, I believe it is limited to 2 GB, but I'm not sure. I'm normally a mac user, but I got this old box to install linux on. I'm still getting my feet wet in the command line environment. I definately appreciate my mac for a lot of its features, but I can begin to understand some of the arguments I've been getting from all of my Wintel/PC fanatic friends.

Thanks for the help,

Russell
ajzchips
El cheapo dude
Posts: 3048
Joined: Sat Mar 23, 2002 12:41 pm
Location: Madrid, Spain

Use AMIFLASH 6.34
It's lots stabler and more reliable.
edwin
The Hardware Archivist
Posts: 6286
Joined: Wed Mar 20, 2002 7:11 pm
Location: Netherlands
Contact:

also, make sure neither the flasher nor the bin file are read-only
edwin/evasive

Do not assume anything

System error, strike any user to continue...
elpinchegringo
New visitors - please read the rules.
Posts: 11
Joined: Wed Jun 26, 2002 11:02 pm
Location: Santa Rosa, CA
Contact:

Use AMIFLASH 6.34
It's lots stabler and more reliable
AMIFlash 6.34 didn't work because it is for AMI BIOS. I have an Award BIOS.

Can you recommend another?
ajzchips
El cheapo dude
Posts: 3048
Joined: Sat Mar 23, 2002 12:41 pm
Location: Madrid, Spain

Oops! Then Award Flash 5.35 or 5.50
Do a search for awdfl535 or af55.exe and you'll find it.
elpinchegringo
New visitors - please read the rules.
Posts: 11
Joined: Wed Jun 26, 2002 11:02 pm
Location: Santa Rosa, CA
Contact:

Neither of those worked either. I am starting to wonder if there's something wrong with my motherboard.

My computer will recognize an 8 gb hd, but as I was installing Linux, I became curious because the installer's automatic partition scheme had a 22 gb partition listed. I then looked at the hard drive inside the case and it turns out its a 30 gb western digital hd. I previously had win 98 installed and it only recognized 8 gb with a fat32 partition.
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

Check if the board has flash write protection jumper - that might be the problem. If not, try using UniFlash (at your own risk).
30GB drive... too bad that FIC does not provide BIOS with support for HDDs over 8.4GB. You might try to use BIOS from some other board but it can be very risky.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
Denniss
BIOS Guru
Posts: 3153
Joined: Thu Mar 21, 2002 8:16 pm
Location: Near Hannover (CEBIT) Germany
Contact:

@Rainbow :
Have you checked both Biosfiles located here for support of HDD over 8GB ?
ftp://ftp.fica.com/bios/motherboards/Pe ... -2003/y2k/
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

Yes - it's old crap with new date. If the file is not in the Int13 directory on the FIC server then it has no support over 8.4GB.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
ajzchips
El cheapo dude
Posts: 3048
Joined: Sat Mar 23, 2002 12:41 pm
Location: Madrid, Spain

He might actually prefer a MRBIOS BIOS... then.
http://www.knowplace.org/bios.html

MR_FIC_.ZIP... both releases are there (just the different I/O).

Doesn't look too bad for a March 1996 BIOS:

(1) Plug 'n Play card support.
1a) Auto resource steering
1b) Win95 compatible
(2) PCI and Bridge support.
2a) Auto resource steering
2b) DEC PCI-PCI bridges
(3) Energy Star power management.
3a) APM for Windows and DOS
3b) VESA DPMS video mgmt
3c) SMI and STPCLK
3d) Timewarp correction
(4) Fast-ATA support.
4a) ATA Mode 4/5 (to 20 MB/S)
4b) Built-in CMD-640, OPTi-621 drivers
(5) Enhanced IDE support.
5a) LBA and CHS translations
5b) EDPT Table support
5c) IBM/Microsoft INT13 extensions
5c) 8 discs max, each to 137 GByte
5d) Drive remapping
5e) Boot SCSI (ahead of IDE)
(6) Atapi and Removable IDE.
6a) CD-ROM recognition
6b) SyQuest and Ejectable Media
(7) Enhanced Floppy support.
7a) 4 floppy/tape-drives max
7b) Drive remapping
(8 ) Enhanced Parallel Port.
8a) SPP, Bidir, EPP, ECP modes
(9) Anti-Virus protection.
(10) Password Security.
(11) PS/2 Mouse support.
(12) Pentium and 6x86 CPU support.
(13) Instant! Boot (tm) (whatever that is...)
elpinchegringo
New visitors - please read the rules.
Posts: 11
Joined: Wed Jun 26, 2002 11:02 pm
Location: Santa Rosa, CA
Contact:

Check if the board has flash write protection jumper - that might be the problem.
How can I tell?


MR_FIC_.ZIP... both releases are there (just the different I/O).
Which I/O do I use?
Rainbow
The UniFlasher
Posts: 3122
Joined: Wed Mar 20, 2002 4:16 pm
Location: Slovakia
Contact:

Get the manual ftp://ftp.fica.com/manuals/motherboards ... T-2003.ZIP
J3, J4: Flash EPROM type: check what's printed on the BIOS chip (remove Award BIOS sticker) and make sure that these jumpers are set correctly

Depends on the I/O chip that's on your board.
Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere
elpinchegringo
New visitors - please read the rules.
Posts: 11
Joined: Wed Jun 26, 2002 11:02 pm
Location: Santa Rosa, CA
Contact:

Where is the I/O chip on the motherboard? Is it something that is usually clearly labeled? (I just don't want to get home, open the box and stare at it like an idiot for an hour looking for the right chip.)

Thanks,

Russell
Post Reply